Slab cost estimate
30x30 Concrete Slab Cost
A 30 ft × 30 ft concrete slab is 900 square feet. At a standard 4-inch thickness it needs about 12.22 cubic yards of concrete (with 10 % waste) and costs roughly $5,400 – $11,700 installed with a plain broom finish.
Need different dimensions? Use the full Slab Cost Calculator for a custom estimate.
Material & Cost Breakdown
| Metric | Value | Notes |
|---|---|---|
| Square footage | 900 sq ft | 30 ft × 30 ft |
| Thickness | 4 in | Standard residential |
| Concrete volume | 11.11 yd³ | Before waste |
| Order volume (10% waste) | 12.22 yd³ | Ready-mix ordering target |
| 80 lb bags needed | 550 bags | Including waste |
| 60 lb bags needed | 734 bags | Including waste |
| Ready-mix material cost | $1,589 – $2,017 | ~$130–$165 per yard delivered |
| Installed cost (broom) | $5,400 – $11,700 | $6–$13 per sq ft |
* Installed cost assumes a standard broom finish, easy site access, and a prepared sub-base. Decorative finishes, tear-out, poor soil, or pump-truck access will move the price higher.
How We Calculated It
- Area: 30 ft × 30 ft = 900 sq ft
- Volume: 900 sq ft × (4 in ÷ 12) = 300.0 cu ft ÷ 27 = 11.11 yd³
- With 10% waste: 11.11 × 1.10 = 12.22 yd³
- Bags (80 lb): 12.22 × 27 ÷ 0.60 cu ft/bag ≈ 550 bags
FAQs
How much does a 30x30 concrete slab cost?
A 30x30 (900 sq ft) concrete slab costs roughly $5,400 to $11,700 installed with a broom finish in 2026. Decorative finishes, tear-out, and site prep can raise the price.
How many cubic yards for a 30x30 slab?
At 4 inches thick, a 30x30 slab needs about 11.11 cubic yards before waste and 12.22 yards after a 10% ordering allowance.
How many 80 lb bags for a 30x30 slab?
You would need about 550 bags of 80 lb concrete (including 10% waste). Above roughly one cubic yard, ready-mix is usually cheaper and easier than bags.
Planning Your 30x30 Pour
When preparing to pour a 30 ft × 30 ft concrete slab, proper planning is essential to keep your project on budget. The dimensions directly determine the total square footage, which in turn dictates the amount of labor, forming materials, and finishing time required.
The thickness is equally important. While 4 inches is standard for this type of slab, increasing the thickness by just one inch will significantly increase the total cubic yards of concrete needed. Always ensure your sub-base is properly compacted and leveled; an uneven base can lead to thick spots that consume more concrete than your initial estimate predicted. Lastly, ordering with a 10% waste margin is a standard industry practice to account for minor spills, uneven ground, and the small amount of concrete left inside the delivery truck.